Freewing F-16C Falcon 64mm EDF Jet PNP RC Airplane
1.it requires 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector.
2.it requires 4 Channel Radio and 4 Channel Receiver
3.it requires 4 Cell Compatible Battery Charger
Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp

The F-16C has finally come to Freewing Model's 64mm class of EDF jets. The clean lines, classic profile, and scale details are all captured in this exceptional 64mm EDF Jet F-16C Fighting Falcon from Freewing Models. Simplicity and durability were major design factors with this model. The airframe has been refined with a simplified control and gear structure that reduces the overall weight and wing load. The ailerons and elevators are joined by two servos for a flying delta configuration. An updated V2 40A ESC includes a reverse thrust function to help slow the jet on the landing roll out. Quality electronic components come pre-installed so you can be in the air in less then one hour.
Features:
40 Amp V2 Electronic Speed Control has reverse thrust functionality
Ailerons and elevators are joined by two servos for a flying delta configuration
Comes with 12-Blade EDF with 2836-3300Kv Brushless Motor
4S LiPo capability for High Performance Flight
Scale details including painted pilot and cockpit, panel lines and landing gear
3x 9g digital gear servos come pre-installed
Includes:
Freewing F-16 Falcon 64mm EDF Jet PNP
Servos, motor, fan unit and ESC are all pre-installed
Requires:
4 Channel Radio - Select a minimum 4 channel radio
4 Channel Receiver - Select a minimum 4 channel receiver
4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector
4 Cell Compatible Battery Charger -
Model Scale |
1/15 Scale |
Wingspan |
680mm / 26.8in |
Length |
1050mm / 41.3in |
Flying Weight |
730g (without battery) |
CG (Center of Gravity) |
81mm from the leading edge of the wing root |
Power System |
2836-3300Kv Brushless Motor |
Speed Control |
40A, internal SBEC with XT60 Connector |
Propeller / EDF |
64mm 12-Blade EDF |
Servos |
|
Landing Gear |
Fixed main landing gear, steerable nose gear. |
Required Battery |
4S 14.8V 2200mAh with XT60 Connector |
Required Radio |
4 Channel 2.4ghz radio |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
No |
Lights |
No |
Hinge Type |
Nylon hinges on all control surfaces |
Material |
EPO Foam |
Skill Level |
Intermediate |
Build Time |
1 Hour |
Recommended Environment |
Outdoors |
